About this Product
LEAK STOPPER Rubberized Roof Patch is a revolutionary advancement in roof patching and repair. This long lasting rubberized repair is specially formulated to penetrate deep into damaged areas and stop roof leaks instantly! The secret is Penetrex™, a unique penetrating oil that reaches deep into the crack and forms a complete seal. With the addition of liquid rubber, this flexible, high performance plastic cement provides a superior watertight bond that will stop problem leaks for good. Product formulated to be used year round. Leak stopper is ideal for a variety of roof surfaces including Shingles, Built-Up Roofs, SBS Modified Roofs, Metal Roofs and many other surfaces.
WHY YOU WILL LOVE IT
- Stops roof leaks INSTANTLY
- Rubberized to prevent cracking
- Enhanced with Pentrex
- Last2-3xs longer than other roof cements
- APP and SBS compatible
WHAT IT DOES: Stops roof leaks instantly.
WHAT IS NEEDED TO COMPLETE THE JOB? Trowel, putty knife, gloves and reinforcing fabric.
PREP THE AREA: Surfaces must be clean, free of surface rust and loose material.
HOW TO APPLY: Use trowel to spread across damaged surface of roof. Embed reinforcing fabric after first layer and apply second layer on top of fabric.
HOW MUCH DO I NEED? Covers approximately 3 sq. ft. per quart. DO’s and DON’Ts: Do apply in exterior applications only. Do wear protective clothing. Don’t apply to plastic, EPDM, Hypalon or similar type of synthetic rubber roof system. If there is a question on compatibility, test a small section first before application to entire surface area.
FOR BEST RESULTS: It is highly recommended to reinforce the repair with a strip of Universal Patching Fabric. Work material to an even consistency over and into the area to be repaired approximately 1/8” to 1/2” thick, two or three inches beyond the problem area. Embed fabric into the cement and cover with a second layer of cement. Form a feathered edge with cement where chimney’s, vent pipes, and other projections meet the roof line. DO NOT EXPOSE DIRECT HEAT/FLAMES OR THIN. Best used when surface temperatures are between 50° and 120 F. In colder weather (50° and below), product should be stored in heated room (70° to 80°F.) at least 24 hours prior to application to promote ease of application. Product formulated to be used year round.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.