Benefect Decon 30: Botanical Disinfectant – Pro Solutions Direct

Save 10% on HandiFoam Cylinder Foam Sealant using code HFCFS10 at checkout.

Benefect Decon 30: Botanical Disinfectant

Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant
Benefect Decon 30: Botanical Disinfectant

Benefect Decon 30: Botanical Disinfectant

Regular price
$143.96
Sale price
$143.96
Regular price
$159.96
Unit price
per 
MFG SKU: 20476-C4
Stock: Out of Stock In Stock

Many of our products have bulk discounts for customers in our Pro Program. Sign up for our Pro Program here.

Purchase Options
Delivery Frequency
At this time due to COVID-19, this product is final sale and cannot be returned.
Regular price
$143.96
Sale price
$143.96
Regular price
$159.96
Unit price
per 

About this Product

Benefect Decon 30 is a ready-to-use (no messy mixing required) EPA registered botanical disinfectant, cleaner, bactericide, virucide, fungicide. The active ingredient (Thymol) is an extract from essential oils of the thyme plant. There are no human health warnings or precautionary statements for use or disposal - no need to rinse or wipe off after application. Personal Protective Equipment is not required.

Detailed Specifications

Quick Overview: Benefect Decon 30 disinfectant is a powerful EPA registered disinfectant that kills over 99.99% of bacteria in 30 Seconds! Cleaner, Deodorizer, Decontaminant, Food Surface Contact Sanitizer. Features: Benefect Decon 30's patented technology is proven to kill over 99.99% of germs, Influenza A including the Pandemic 2009 H1N1 Infulenza A virus, Rhinovrius (the common cold virus), Staphylococcus aureus, Salmonella enterica, Pseudomonas aeruginosa & Escherichia coli on hard, non-porous, inanimate surfaces. tested in the presence of %: organic soil load. Botanical cleaning and disinfection solution. Contains non-VOC emitting botanical essential oils. Effectively eliminates odors produced by odor-causing bacteria, fungi, and other odor-causing organisms on concrete, finished woodwork, wood framing and studding, trim, bedding, mattresses, textiles, upholstered furniture, carpets, pads, and subfloors. Light Scent Economical price! Kills over 99.99% of bacteria in 30 seconds! Available for sale in all States Uses the same proprietary Botanical Active Ingredient Benefect is known for.

Product Specifications

Mfg. SKU: 20476
EPA Reg. No. 84683-3-74771

EPA N List
Packaged: 1 Gallon, 5 Gallon
Weight per Gallon: 3.85 kg
Color: Clear
Scent: Lemon & Thyme
Flash Point: None
pH: 4.0 - 5.0
PPE: NONE required
Shelf Life: Best If Used Before 3 Years
Electrical Charge: Non-anionic
Coverage per Gallon: 1000-1200 square feet
Active Ingredients: Thymol 0.05% (present as a component of Thyme oil)
Freeze Thaw Stable: Yes
Made in U.S.A.

 

EPA Registered for Control Against

  • Influenza A
  • H1N1
  • Avian Flu
  • Rhinovirus (Common cold)
  • HIV-1 (AIDS virus)
  • Pseudomonas
  • Salmonella
  • Staphylococcus aureus (Staph)
  • MRSA
  • E. coli O157
  • Trichophyton
  • Aspergillus
  • Candida
  • Other odor-causing microorganisms

Usage Instructions

PPE: NONE Required

 

TO CLEAN:
1. Wet the surface (spot test to check surface compatibility) and wipe clean.

 

TO DEODORIZE:
1. Wet the surface (spot test to check surface compatibility).
2. Allow to air-dry. No rinsing or wiping is required.

 

TO DISINFECT:
1. Wet the surface by sprayer (high or low pressure, hand or power operated), cloth, sponge or mop (spot test to check surface compatibility).
2. Leave for 10 minutes. Allow to air-dry.
3. No rinsing or wiping is required. For heavily soiled surfaces pre-cleaning is required

 

TO SANITIZE:
1. Wet the surface (spot test to check surface compatibility).
2. Leave for 30 seconds. Allow to air-dry. No rinsing or wiping is required.

 

TO SANITIZE & DEODORIZE CARPETS:
1. Apply to the pre-cleaned carpet area by wand, sprayer, extractor, spin bonnet or immersion processes until saturated (spot test fibers for colorfastness before use).
2. Scrub or agitate the carpet as needed to ensure the test substance is delivered throughout the carpet pile and backing. Extract and allow to air dry.

Quick Overview: Benefect Decon 30 disinfectant is a powerful EPA registered disinfectant that kills over 99.99% of bacteria in 30 Seconds! Cleaner, Deodorizer, Decontaminant, Food Surface Contact Sanitizer. Features: Benefect Decon 30's patented technology is proven to kill over 99.99% of germs, Influenza A including the Pandemic 2009 H1N1 Infulenza A virus, Rhinovrius (the common cold virus), Staphylococcus aureus, Salmonella enterica, Pseudomonas aeruginosa & Escherichia coli on hard, non-porous, inanimate surfaces. tested in the presence of %: organic soil load. Botanical cleaning and disinfection solution. Contains non-VOC emitting botanical essential oils. Effectively eliminates odors produced by odor-causing bacteria, fungi, and other odor-causing organisms on concrete, finished woodwork, wood framing and studding, trim, bedding, mattresses, textiles, upholstered furniture, carpets, pads, and subfloors. Light Scent Economical price! Kills over 99.99% of bacteria in 30 seconds! Available for sale in all States Uses the same proprietary Botanical Active Ingredient Benefect is known for.

Mfg. SKU: 20476
EPA Reg. No. 84683-3-74771

EPA N List
Packaged: 1 Gallon, 5 Gallon
Weight per Gallon: 3.85 kg
Color: Clear
Scent: Lemon & Thyme
Flash Point: None
pH: 4.0 - 5.0
PPE: NONE required
Shelf Life: Best If Used Before 3 Years
Electrical Charge: Non-anionic
Coverage per Gallon: 1000-1200 square feet
Active Ingredients: Thymol 0.05% (present as a component of Thyme oil)
Freeze Thaw Stable: Yes
Made in U.S.A.

 

EPA Registered for Control Against

  • Influenza A
  • H1N1
  • Avian Flu
  • Rhinovirus (Common cold)
  • HIV-1 (AIDS virus)
  • Pseudomonas
  • Salmonella
  • Staphylococcus aureus (Staph)
  • MRSA
  • E. coli O157
  • Trichophyton
  • Aspergillus
  • Candida
  • Other odor-causing microorganisms

PPE: NONE Required

 

TO CLEAN:
1. Wet the surface (spot test to check surface compatibility) and wipe clean.

 

TO DEODORIZE:
1. Wet the surface (spot test to check surface compatibility).
2. Allow to air-dry. No rinsing or wiping is required.

 

TO DISINFECT:
1. Wet the surface by sprayer (high or low pressure, hand or power operated), cloth, sponge or mop (spot test to check surface compatibility).
2. Leave for 10 minutes. Allow to air-dry.
3. No rinsing or wiping is required. For heavily soiled surfaces pre-cleaning is required

 

TO SANITIZE:
1. Wet the surface (spot test to check surface compatibility).
2. Leave for 30 seconds. Allow to air-dry. No rinsing or wiping is required.

 

TO SANITIZE & DEODORIZE CARPETS:
1. Apply to the pre-cleaned carpet area by wand, sprayer, extractor, spin bonnet or immersion processes until saturated (spot test fibers for colorfastness before use).
2. Scrub or agitate the carpet as needed to ensure the test substance is delivered throughout the carpet pile and backing. Extract and allow to air dry.

What types of mold do Benefect disinfectants kill?

Both Benefect Botanical Disinfectant and Decon 30 kill Trichophyton Mentagrophytes which is the representative organism over the entire category of mold/fungi/yeast; ie, the hardest to kill as per the EPA. In fact this is the only test that the EPA requires to legally approve a product as a general fungicide. A fungicide is defined as ‘biocidal chemical compound or biological organism used to kill or inhibit fungi or fungal spores’.

Decon 30 is additionally effective against Candida Albicans and Aspergillus Niger (prevents mold growth).

Will Benefect disinfectants kill a specific type of mold – penicillium for example?

We have not tested against penicillium specifically but both Benefect and Decon 30 are EPA approved to kill Trichophyton Mentagrophytes, which is the hardest type of mold to kill in the category of mold/fungi/yeast. In fact both the EPA has indicated Trichophyton to be the Representative Organism over this category and only require efficacy against Trichophyton to approve a product as a general fungicide.

Do Benefect disinfectants also kill mold spores?

Yes. The testing that is required by both the EPA for a product to be approved as a fungicide includes mold spores.

Do Benefect disinfectants also kill mycotoxins?

No. Mycotoxins are a chemical byproduct of mold spores. Benefect disinfectants kill microorganisms, not chemicals byproducts. That being said, in killing and removing the mold spores you will prevent new mycotoxins from being released, and there is a natural degradation that the existing mycotoxins will go through.

Which is better to use for mold clean up – Benefect or Decon 30?

Both products kill mold the exact same way and to the same degree on hard surfaces. Decon 30 does better at additionally penetrating into porous surfaces. While we cannot guarantee or quantify to what extent that is (only because the EPA does not provide testing on porous surfaces), we know from 3rd party studies that Decon 30 is very powerful even on porous surfaces. Also Decon 30 is an EPA approved carpet sanitizer, which just further qualifies how well Decon works on porous surfaces. For these reasons we almost always recommend Decon 30 for mold jobs.

What is the best way to control mold spores in my home?

There are three things we recommend:

  1. Keep your home dry by using dehumidifiers and allow for air movement.
  2. Use a vacuum with a HEPA filter. A HEPA filter will capture particles as small as the size of mold spores so use it on any/all surfaces that you reach. Keep that HEPA filter clean and when you change or clean the filter, make sure you do it outside of your house.
  3. Spray or wipe Decon 30 on any surface/object in your home. In those places that you are more concerned may have mold, make sure you keep the surface wet for 10-minutes. You can also decontaminate your vacuum with Decon 30.

I have a contractor coming in to do a mold remediation. What should I be expecting from them?

Every mold job is a little bit different. You should first of all make sure your contractor is certified to do water damage and mold remediation. You can determine that by checking if they are IICRC or RIA certified.

The typical mold remediation project will usually follow this sequence (ref Rachel Adams, Indoor Environmental Management): 

  1. Identify and correct the source of moisture (that has caused the mold growth).
  2. Set up containment.
  3. Establish negative air.
  4. Remove contaminated building materials.
  5. Clean all surfaces.
  6. Have post remediation samples collected.

Removal of contaminated materials is one of the most important parts of mold remediation and as much as can possibly be removed, will. Various tools may be used during removal that may include:

  • Removing contaminated structural material such as cutting out dry wall.
  • HEPA vacuuming will likely happen all throughout the whole job.
  • Sanding surfaces.
  • Using a degreaser to clean/remove such as Benefect Atomic Degreaser.
  • Soda blasting or dry ice followed by HEPA vacuuming.

What is a HEPA sandwich?

This is process that is often taught in mold certification classes:  Remove – Disinfect – Remove or in other terms, HEPA Vacuum – Disinfect - HEPA Vacuum. Even though Benefect disinfectants do not need to be rinsed or removed after application, we often encourage a HEPA sandwich approach because even dead mold spores can release mycotoxins. The HEPA sandwich is a good, thorough approach especially on porous surfaces.

Can Benefect or Decon be used in my laundry to disinfect my clothing and other fabrics?

Not really. Both Benefect and Decon 30 are ready to use products, which means water has already been added. If you add either product to a load of wash you would be diluting the formula and we wouldn’t know what effectiveness it would have. Also both products are hard surface disinfectants and we have no testing to verify their efficacy on moldy fabrics specifically.

You can treat your washing machine with either of disinfectants when it is empty by simply spraying the product in and allowing it to air dry. It is good idea to keep the washing machine door open after use to allow it to dry.

If you have more questions about mold in your home.

People with extreme mould sensitization can sometimes need to take very extreme measures. There are number of doctors/professionals who can help. A couple that we are familiar with are:

Product Reviews