Storm System Transparent Dual Dispersion
About this Product
Dual Dispersion technology offers one-coat application blending the best features of traditional oil based finishes and Acrylic paints. This natural clear finish for wood has excellent flow, leveling and durability of oil based paint and the fast dry time and soap and water clean-up of latex paint. Dual Dispersion Clear Finish resists cracking, peeling blistering and moisture.
Application:
All bare wood surfaces must be clean and thoroughly dry before application of this product. Always test a small area before application to the entire surface. All mildewed areas should be scrubbed with Storm System All Surface Mold & Mildew Stain Remover and thoroughly rinsed. New pressure treated wood should be scrubbed with Storm System All Surface Cleaner to remove all surface deposits. Rinse thoroughly and allow to dry. All surfaces should be sanded down to remove any dead wood fibers from the surface, to ensure proper penetration and adhesion.
Lead Warning ! - If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.
This product is of proper consistency as packaged to be applied without thinning under normal environmental application conditions. Stir thoroughly. Apply with synthetic brush, roller or spray. NOTE: For decks, use Storm System CATEGORY 1 100% Acrylic Top Coat #11550 for longer life and greater.
Recommended Use:
For Hardwood, Pressure Treated, Conventional and Exotic Hardwoods / Sun Decks / Wood Screening / Patios / Siding / Fencing / Benches / Walkways / Porches / Outdoor Furniture / Railings and Posts / Pool and Garden Enclosures FOR WOOD SUBSTRATES ONLY
• Unfinished Wood Decks, Pressure Treated Wood, Siding, Rails, Posts, Fences, Patios, Screening and Outdoor Furniture: 1 Coat Storm System Dual Dispersion Clear Finish-Transparent #11540 Note: New pressure treated wood must be thoroughly cleaned with Storm System All Surface Cleaner, rinsed clean and allowed to dry completely before finishing.
Do not use interchangeably on the same substrate with other Storm System products as you may note differences in appearance. Appearance varies with different species
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.