Duralux Marine Enamel – Pro Solutions Direct

Duralux Marine Enamel

  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
  • Load image into Gallery viewer, Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel
Duralux Marine Enamel

Duralux Marine Enamel

Regular price
$26.35
Sale price
$26.35
Regular price
$30.99
Unit price
per 
Signal Green
Cruiser Blue
Black
White
Haze Gray
International Orange
Aquamarine
Signal Yellow
Unit Rig Gray
Signal Red
Alpine Green
Lafitte Green
Biloxi Blue
National Blue
MFG SKU: M720-4
Stock: Out of Stock In Stock

Many of our products have bulk discounts for customers in our Pro Program. Sign up for our Pro Program here.

Purchase Options
Delivery Frequency
Regular price
$26.35
Sale price
$26.35
Regular price
$30.99
Unit price
per 

About this Product

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging.

Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye.


Product Specifications:

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel.
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish.
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures.
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight.
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.

Detailed Specifications

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging. Packaged in a 1-quart container. Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye.

Product Specifications

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging. Packaged in a 1-quart container. 

Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye. 

Product Features

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging.

Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye.


Product Specifications:

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel.
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish.
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures.
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight.
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.

Usage Instructions

SURFACE PREPARATION 

  • All surfaces must be free of moisture, wax, dirt, rust and other foreign matter.
  • Remove any loose or peeling paint.
  • Use sandpaper, power brushing or a liquid de-glosser to dull any existing gloss.
  • Remove all dust by wiping surfaces with a clean cloth dampened with paint thinner.
  • New Steel
    • On clean, rust-free steel apply a prime coat of either ZINC-LIKE PRIMER M739, or SUB TROP RED PRIMER M740.
    • Bare galvanized metal should be primed with ALUMINUM BOAT GREEN M736.
  • Rusted Or Painted Steel
    • Remove all rust, mill scale and dirt by scraping, brushing or sandblasting.
    • Prime surfaces with either ZINC-LIKE M739, YACHT PRIMER M741 or SUB TROP RED M740.
    • Where extensive surface preparation is either impractical or impossible, prepare surfaces by Hand Tool Method SSPC-SP-2 and prime with ALUMITHANE M730.
  • Aluminum
    • Wipe surface down with white vinegar and prime with either ALUMINUM BOAT PAINT M736 or ZINC-LIKE M739.
  • Wood
    • Clean dirt and contaminants from the surface.
    • Prime bare wood with YACHT PRIMER M741.
  • Fiberglass
    • Sand surface until a dull finish is obtained using fine sandpaper or 1/0 steel wool.
  • Topcoat with two full coats of DURALUX Marine Enamel.

    APPLICATION 

    • Apply two thin coats of DURALUX on properly prepared surfaces as outlined in our “Surface Prearation” section.
    • "Feather edge" last brush strokes to insure a smooth finish.
    • Do not over apply.
    • Maintain a wet edge to avoid lap marks.
    • Do not paint in direct sunlight.
    • Application Temperature, air, surface & material: Minimum 50°F, Maximum 100°F. Relative Humidity: 85% maximum. At least 5°F above dew point.

    METHOD OF APPLICATION

    • Brush, natural bristle.
    • Roller, short nap 1/4"-3/8" nap or mohair.
    • Spray: For airless spray use a .013" to .017" orifice with minimum 1,850 psi at tip.
    • For conventional spray use Graco 700 Gun 217-757 equipment or equivalent, with fluid pressure of 20 lbs. and atomizing pressure of 35-40 lbs.
    • Thinning: If thinning is desired, use Mineral Spirits or Xylene not to exceed a half pint (8 ounces) per gallon.

    Refer to Safety Data Sheet for additional health and safety information.

    Refer to Technical Data Pages for specific surface preparation, application, drying and further information.


    *disclaimer: on-screen color representations may vary from actual paint colors.

FAQ's

Can I thin or reduce the Marine Enamel to help with application? 

  • Yes, reducing will help with all methods of application. Refer to the TDS for proper solvent and reduction amounts.

What’s the best method to apply the Enamel? 

  • Brush: soft natural bristle
  • Roller: Foam, Mohair, Woven (maximum nap length 3/8”)
  • Spray: HVLP, Conventional, airless (caution using airless because it’s too easy to over apply)

How many coats do I need? 

How thick should each coat be applied? 

  • THIN! Applying in thin coats is critical to achieving a lasting, hard finish. The recommended Wet Film Thickness (WFT) is located on the TDS. The thickness of paint is expressed in mils (one mil equals 1/1000 of inch).
  • Enamels (M720-M774): WFT: 3-4 mils
  • Aluminum Boat Green, M736: WFT: 2-3 mils
  • ProTite Epoxy, M780-784: WFT: 4-5 mils
  • ProPon Epoxy, M390, M388, 9311, 9312, 9314, 9321: WFT: 6-8 mils
  • Alumithane, M730: WFT: 3-4 mils
  • Clarity on what a “Thin Coat” means
    • An American Dollar Bill: 4.30 mils
    • Regular aluminum foil: 0.6 mils
    • 20lb copy paper: 3.80 mils

How long do I need to wait between each coat? 

  • It will depend on which product is being used. Refer to the TDS for specific times.
  • The drying and recoat times will vary depending on the temperature and humidity levels. The times indicated on the TDS are based on 75°F and 50% humidity. As these levels change, so will the drying / recoat times. Cooler temperatures will result in much
  • longer drying times. A general guide and reference is that for every 15 degrees drop in temperature, the drying/ recoat times will double.

What is the minimum / maximum temperatures for applying? 

  • The minimum temperature for all Duralux coatings is 50°F
  • The maximum temperatures are as followed
    • Duralux Enamels M720-M774, Aluminum Boat Green M736 & ProTite Epoxy: 90°F
    • ProPon Epoxy M390 & Alumithane M730: 80°F.
      • M730 Alumithane is a moisture cure coating. Minimize exposure to air. Higher humidity levels will accelerate the curing process.

What primer do you recommend? 

  • The Primer will depend on what is being painted. The TDS’s will cover specifics to what the primer can be used on. These are the most common surfaces
    • Bare Aluminum: Prime with Aluminum Boat Green M736
    • Bare Steel: Prime with Yacht White Primer M741 or Alumithane M730
    • Galvanized Metal: Prime with Aluminum Boat Green M736
    • Previously Painted Surfaces: A small area should be tested for compatibility when using ALUMINUM BOAT PAINT M736 or Yacht White Primer M741 over an existing coating.
    • Bare Wood: Prime with Yacht White Primer M741
    • Fiberglass: Use the Duralux Marine Enamels directly to the fiberglass. Provided the fiberglass is clean, dull and dry.
    • Primer to use under Epoxy Top-Coat: M730 Alumithane

Surface Preparation: 

  • Refer to TDS for specific surface preparation information.
    • Aluminum: Scuff sand with 150-180 grit sandpaper or wipe surface down with white vinegar
    • Wood: Sand with 60-120 grit paper, vacuum sanding dust from surface
    • Fiberglass: Sand surface until a dull finish is obtained using fine sandpaper or 1/0 steel wool.
    • Steel / Iron: Remove all rust, mill scale and dirt by scraping, brushing or sandblasting.

What acidity level is recommended for the white vinegar etching wash? 

  • 5%

Can the Duralux Marine Enamel be tinted? 

  • No. Duralux Marine Enamels are specifically designed to work as is. Adjusting or altering the color with tints will harm the enamels ability to harden and adhere. Colors can be created by mixing package enamels together, but this practice is not really recommended and voids any responsibility of the dealer or manufacturer.

What sheens are available? 

  • The Duralux Marine Enamels and Epoxies are a high gloss finish. There are a few specific products that have a lower sheen
    • Aluminum Boat Green M736: Flat
    • Primers (except Alumithane): Flat
    • Camouflage Paints: Flat

Can I use any of the Duralux Marine Coatings to paint the inside of a pool, water tank or fish pond? 

  • No. We do not recommend painting. Any marine paint (that would take being submerged) could be toxic in such a small environment. They contain volatile organic compounds; these VOC gases will harm the fish and aquatic plants.

How long do I need to wait before putting the boat in the water and using it? 

  • Depending on how many coats of paint have been applied and weather conditions while drying a boat can generally be used within 5-7 days. More coats of paint will typically take longer to cure, 7-10 days before using.

Can I use any of the Duralux Enamels to paint the bottom of a boat hull? 

  • No. The only products that are suitable to use on the bottom or below the water line are o Aluminum Boat Green M736
  • Alumithane M730
  • ProTite Aliphatic Urethane Epoxy M780-M784

I applied the Duralux Enamel XYZ days ago and it’s still not hard / dry / still soft, why? 

  • The most common cause of the Duralux (or any oil-based paint) enamel not hardening / drying / remaining soft, is over application of the paint, ie: you put the product on too thick. In paint tech terminology, it’s called Solvent Entrapment. Solvent Entrapment is becoming more and more common because of the VOC restrictions and the reduction of solvents allowed in the paint’s formula. The lower amounts of solvents result in a thicker paint, so when the customer applies the paint, they end up putting too thick of a layer of paint. On the surface of the paint, the solvents are easily evaporated off, so it skins over. The surface skin slows the ability of the deeper solvents from evaporating, resulting in a “soft / not hard” paint film. Depending on how thick the paint was applied, the temperature and humidity levels, the paint will eventually harden over time, but it’s hard to say how long that would take. Per specifications of film thickness, the paint will be hard and cured in 5-7 days. With the thicker layer paint, it could be 10-30 days before its hard and cured.
Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging. Packaged in a 1-quart container. Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye.

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging. Packaged in a 1-quart container. 

Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye. 

Get a durable, long-lasting, elegant finish to your boat or other marine structure with Duralux Marine Enamel. Duralux Urethane-Alkyd Marine Enamel is a single package topside enamel that resists salt water, oil, gasoline, repeated washing, and the discoloration effects of harbor gasses for a durable, long-lasting finish. It adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for a variety of marine applications such as commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures. Apply 2 thin coats of Duralux on a prepared surface with a brush, roller or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Do not apply to surfaces below the water line. Follow directions on packaging.

Originally developed for commercial or pleasure boats, Duralux coatings are used for most onshore and offshore applications where marine grade protection from harsh exposure is required. We offer a complete line of high-performance enamels, spar varnish and other marine coatings in a variety of colors to satisfy the most discriminating boat owner's eye.


Product Specifications:

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel.
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish.
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures.
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight.
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.

SURFACE PREPARATION 

  • All surfaces must be free of moisture, wax, dirt, rust and other foreign matter.
  • Remove any loose or peeling paint.
  • Use sandpaper, power brushing or a liquid de-glosser to dull any existing gloss.
  • Remove all dust by wiping surfaces with a clean cloth dampened with paint thinner.
  • New Steel
    • On clean, rust-free steel apply a prime coat of either ZINC-LIKE PRIMER M739, or SUB TROP RED PRIMER M740.
    • Bare galvanized metal should be primed with ALUMINUM BOAT GREEN M736.
  • Rusted Or Painted Steel
    • Remove all rust, mill scale and dirt by scraping, brushing or sandblasting.
    • Prime surfaces with either ZINC-LIKE M739, YACHT PRIMER M741 or SUB TROP RED M740.
    • Where extensive surface preparation is either impractical or impossible, prepare surfaces by Hand Tool Method SSPC-SP-2 and prime with ALUMITHANE M730.
  • Aluminum
    • Wipe surface down with white vinegar and prime with either ALUMINUM BOAT PAINT M736 or ZINC-LIKE M739.
  • Wood
    • Clean dirt and contaminants from the surface.
    • Prime bare wood with YACHT PRIMER M741.
  • Fiberglass
    • Sand surface until a dull finish is obtained using fine sandpaper or 1/0 steel wool.
  • Topcoat with two full coats of DURALUX Marine Enamel.

    APPLICATION 

    • Apply two thin coats of DURALUX on properly prepared surfaces as outlined in our “Surface Prearation” section.
    • "Feather edge" last brush strokes to insure a smooth finish.
    • Do not over apply.
    • Maintain a wet edge to avoid lap marks.
    • Do not paint in direct sunlight.
    • Application Temperature, air, surface & material: Minimum 50°F, Maximum 100°F. Relative Humidity: 85% maximum. At least 5°F above dew point.

    METHOD OF APPLICATION

    • Brush, natural bristle.
    • Roller, short nap 1/4"-3/8" nap or mohair.
    • Spray: For airless spray use a .013" to .017" orifice with minimum 1,850 psi at tip.
    • For conventional spray use Graco 700 Gun 217-757 equipment or equivalent, with fluid pressure of 20 lbs. and atomizing pressure of 35-40 lbs.
    • Thinning: If thinning is desired, use Mineral Spirits or Xylene not to exceed a half pint (8 ounces) per gallon.

    Refer to Safety Data Sheet for additional health and safety information.

    Refer to Technical Data Pages for specific surface preparation, application, drying and further information.


    *disclaimer: on-screen color representations may vary from actual paint colors.

Can I thin or reduce the Marine Enamel to help with application? 

  • Yes, reducing will help with all methods of application. Refer to the TDS for proper solvent and reduction amounts.

What’s the best method to apply the Enamel? 

  • Brush: soft natural bristle
  • Roller: Foam, Mohair, Woven (maximum nap length 3/8”)
  • Spray: HVLP, Conventional, airless (caution using airless because it’s too easy to over apply)

How many coats do I need? 

How thick should each coat be applied? 

  • THIN! Applying in thin coats is critical to achieving a lasting, hard finish. The recommended Wet Film Thickness (WFT) is located on the TDS. The thickness of paint is expressed in mils (one mil equals 1/1000 of inch).
  • Enamels (M720-M774): WFT: 3-4 mils
  • Aluminum Boat Green, M736: WFT: 2-3 mils
  • ProTite Epoxy, M780-784: WFT: 4-5 mils
  • ProPon Epoxy, M390, M388, 9311, 9312, 9314, 9321: WFT: 6-8 mils
  • Alumithane, M730: WFT: 3-4 mils
  • Clarity on what a “Thin Coat” means
    • An American Dollar Bill: 4.30 mils
    • Regular aluminum foil: 0.6 mils
    • 20lb copy paper: 3.80 mils

How long do I need to wait between each coat? 

  • It will depend on which product is being used. Refer to the TDS for specific times.
  • The drying and recoat times will vary depending on the temperature and humidity levels. The times indicated on the TDS are based on 75°F and 50% humidity. As these levels change, so will the drying / recoat times. Cooler temperatures will result in much
  • longer drying times. A general guide and reference is that for every 15 degrees drop in temperature, the drying/ recoat times will double.

What is the minimum / maximum temperatures for applying? 

  • The minimum temperature for all Duralux coatings is 50°F
  • The maximum temperatures are as followed
    • Duralux Enamels M720-M774, Aluminum Boat Green M736 & ProTite Epoxy: 90°F
    • ProPon Epoxy M390 & Alumithane M730: 80°F.
      • M730 Alumithane is a moisture cure coating. Minimize exposure to air. Higher humidity levels will accelerate the curing process.

What primer do you recommend? 

  • The Primer will depend on what is being painted. The TDS’s will cover specifics to what the primer can be used on. These are the most common surfaces
    • Bare Aluminum: Prime with Aluminum Boat Green M736
    • Bare Steel: Prime with Yacht White Primer M741 or Alumithane M730
    • Galvanized Metal: Prime with Aluminum Boat Green M736
    • Previously Painted Surfaces: A small area should be tested for compatibility when using ALUMINUM BOAT PAINT M736 or Yacht White Primer M741 over an existing coating.
    • Bare Wood: Prime with Yacht White Primer M741
    • Fiberglass: Use the Duralux Marine Enamels directly to the fiberglass. Provided the fiberglass is clean, dull and dry.
    • Primer to use under Epoxy Top-Coat: M730 Alumithane

Surface Preparation: 

  • Refer to TDS for specific surface preparation information.
    • Aluminum: Scuff sand with 150-180 grit sandpaper or wipe surface down with white vinegar
    • Wood: Sand with 60-120 grit paper, vacuum sanding dust from surface
    • Fiberglass: Sand surface until a dull finish is obtained using fine sandpaper or 1/0 steel wool.
    • Steel / Iron: Remove all rust, mill scale and dirt by scraping, brushing or sandblasting.

What acidity level is recommended for the white vinegar etching wash? 

  • 5%

Can the Duralux Marine Enamel be tinted? 

  • No. Duralux Marine Enamels are specifically designed to work as is. Adjusting or altering the color with tints will harm the enamels ability to harden and adhere. Colors can be created by mixing package enamels together, but this practice is not really recommended and voids any responsibility of the dealer or manufacturer.

What sheens are available? 

  • The Duralux Marine Enamels and Epoxies are a high gloss finish. There are a few specific products that have a lower sheen
    • Aluminum Boat Green M736: Flat
    • Primers (except Alumithane): Flat
    • Camouflage Paints: Flat

Can I use any of the Duralux Marine Coatings to paint the inside of a pool, water tank or fish pond? 

  • No. We do not recommend painting. Any marine paint (that would take being submerged) could be toxic in such a small environment. They contain volatile organic compounds; these VOC gases will harm the fish and aquatic plants.

How long do I need to wait before putting the boat in the water and using it? 

  • Depending on how many coats of paint have been applied and weather conditions while drying a boat can generally be used within 5-7 days. More coats of paint will typically take longer to cure, 7-10 days before using.

Can I use any of the Duralux Enamels to paint the bottom of a boat hull? 

  • No. The only products that are suitable to use on the bottom or below the water line are o Aluminum Boat Green M736
  • Alumithane M730
  • ProTite Aliphatic Urethane Epoxy M780-M784

I applied the Duralux Enamel XYZ days ago and it’s still not hard / dry / still soft, why? 

  • The most common cause of the Duralux (or any oil-based paint) enamel not hardening / drying / remaining soft, is over application of the paint, ie: you put the product on too thick. In paint tech terminology, it’s called Solvent Entrapment. Solvent Entrapment is becoming more and more common because of the VOC restrictions and the reduction of solvents allowed in the paint’s formula. The lower amounts of solvents result in a thicker paint, so when the customer applies the paint, they end up putting too thick of a layer of paint. On the surface of the paint, the solvents are easily evaporated off, so it skins over. The surface skin slows the ability of the deeper solvents from evaporating, resulting in a “soft / not hard” paint film. Depending on how thick the paint was applied, the temperature and humidity levels, the paint will eventually harden over time, but it’s hard to say how long that would take. Per specifications of film thickness, the paint will be hard and cured in 5-7 days. With the thicker layer paint, it could be 10-30 days before its hard and cured.

href="https://cdn.shopify.com/s/files/1/0397/7678/0441/files/M470_Duralux_Marine_Enamel_Shrimp_Boat_White.pdf?v=1639588128" rel="nofollow">M740 Shrimp Boat White SDS

M690 Net Dip Green SDS

M691 Duck Boat Drab SDS

M723 Navy Gray SDS

M724 Biloxi Blue SDS

M725 Tile Red SDS

M726 Rig Gray SDS

M728 Signal Red SDS

M731 Haze Gray SDS

M732 Lafitte Green SDS

M733 International Orange SDS

M734 Alpine Green SDS

M735 Aquamarine SDS

M737 Cruiser Blue SDS

M738 Spar Varnish SDS

M739 Zinc-Like Primer SDS

M740 Sub Trop Red Primer SDS

M741 Yacht Primer White SDS

M744 Signal Yellow SDS

M745 Dead Grass Green SDS

href="https://cdn.shopify.com/s/files/1/0397/7678/0441/files/M746_Duralux_Enamel_CAMO_Pirogue_Paint_Green.pdf?v=1639589350" rel="nofollow">M746 Pirogue Green SDS

href="https://cdn.shopify.com/s/files/1/0397/7678/0441/files/M748_Duralux_Marine_Enamel_National_Blue.pdf?v=1639589409" rel="nofollow">M748 National Blue SDS

M749 Signal Green New SDS

M774 Gulf Blue SDS

Enamels Color Card

Product Reviews