About this Product
Ensure your HVAC system can operate at peak efficiency with Fiberlock IAQ 8000 HVAC Sealant. Designed to promote airflow, this duct sealant is formulated with a fungistatic to inhibit the growth of mold while minimizing dust buildup. The penetrating coating features a high-build formula designed to bridge and reinforce duct liner or duct board insulation materials. It works on a variety of substrates including fiberglass duct liner insulation, unfaced fiberglass duct board and unlined duct work. Successfully tested to ASTM standard C-411 "Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation." Follow all directions on label for application. Packaged in a 5-gallon container.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- DUCT INSULATION COATING: Ensure your HVAC system is running at optimal efficiency with Fiberlock IAQ 8000 HVAC Sealant. Formulated with a fungistatic, it resists mold growth while minimizing dirt buildup and increasing airflow.
- HIGH-BUILD FORMULA: This high-performance industrial sealant features a high-build formula designed to bridge and reinforce duct liner or duct board insulation materials. It can also be used to lock down loose particulates.
- VERSATILE APPLICATIONS: IAQ 8000 is ideal for use on a variety of substrates, including fiberglass duct liner insulation, unfaced fiberglass duct board, and unlined duct work. It can also be used to lock down residual particulates.
- EASY TO APPLY: Ensure your surface is clean. Mix IAQ 8000 thoroughly and apply 1-2 coats with a brush or airless sprayer. Follow all directions on label. Packaged in a 5-gallon container.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
IAQ 8000 sealant is a high performance coating for use in duct work. This high-build coating is designed to bridge and reinforce duct liner or duct board insulation materials. IAQ 8000 can also be used to seal unlined duct work prior to component removal, preventing fiberglass and inanimate particulate from becoming airborne. IAQ 8000 dries to form a durable, flexible, moisture-resistant protective coating with a semi-gloss finish that minimizes dirt buildup on the coating surface. The high viscosity provides maximum bridging ability on insulation materials and reduces sagging and dripping when applied to the vertical and top surfaces of unlined duct.
Successfully tested to ASTM standard C-411 “Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation”. ASTM E-84 Class A fire rating. Meets requirements of NFPA 90A/90B standard. Additionally, IAQ 8000 was tested in accordance with the procedures outlined in ASTM G 21 and received a No. 0 rating (No fungal growth, 0% growth on the specimens).
- High viscosity for maximum bridging ability
- Reduces sagging and dripping
- Meets NFPA 90A/90B
- Resurfaces and encapsulates fiberglass lined duct work
- Resistant to mold growth on the dry coating surface only
- MFG SKU: 8380-5
PRECAUTIONS
- Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C).
- Stir thoroughly.
- Do not mix with any other coatings, solvents or colors in oil.
- The IAQ 8000 coating is resistant to mold only on the surface of the coating.
- No mold resistance claim is made other than to the coating itself.
- The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs or other disease-causing organisms.
- Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content.
- Use adequate ventilation during application.
- When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.
- For interior use only.
- Check with local building code enforcement authority for any additional requirements.
SURFACE PREPARATION
Clean and remove all dust and loose particulate from ductwork, being careful not to damage insulation. Follow duct manufacturer’s instructions for proper cleaning.
APPLICATION TOOLS
Apply IAQ 8000 with brush, roller or airless spray equipment.
- Brush: Synthetic, nylon or polyester bristle
- Roller: Synthetic Fiber 3/8” nap or longer
- Spray Settings: Pressure: 2500-3000 P.S.I. Tips: .019 to .023 tips
PRODUCT APPLICATION
Prior to application, mix thoroughly to achieve a uniform consistency. Apply IAQ 8000 to all surfaces by brush or airless spray. Application rate will vary depending on porosity of the insulation. Apply one coat by airless spray, or two coats by brush. Porous surfaces may require additional coats. Ensure that surfaces are completely sealed. Circulate fresh air through the HVAC system to help dry the coating. Exhaust air outside the building. IAQ 8000 can be applied using HVAC robotic spray applicators.
COVERAGE
- Smooth Surfaces: 100-200 ft2/gal
- Porous Surfaces: Depends on porosity
DRYING TIME
- @ 70°F 50% R.H
- To Touch – 1-2 hours
- To Recoat – 8-16 hours
CLEANUP
Clean tools and drippings with warm soapy water before IAQ 8000 dries. Dispose of all waste according to all existing local, state, and federal regulations.
PRECAUTIONS
Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. The IAQ 8000 coating is resistant to mold only on the surface of the coating. No mold resistance claim is made other than to the coating itself. The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs or other disease-causing organisms. Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter. For interior use only. Check with local building code enforcement authority for any additional requirements.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.