Leak Stopper Rubber Flexx Sealant is a convenient spray patch and repair sealant that dries black. This multi-purpose product allows for quick repairs across a variety of surfaces. The rubberized finish stays flexible to withstand a range of temperatures. Just point and spray to make basic repairs on wood, asphalt roofing, metal and masonry surfaces. Rubber-Flexx is ideal for a variety of roof surfaces including: Shingles Metal Roofs Chimneys, Skylights, Gutters, Pipes, and many other surfaces.
Product Specifications:
Flexible Sealant
Usage Instructions
DIRECTIONS
Clean and dry surface thoroughly before Remove wax, grease, dirt, etc.
BEFORE APPLYING
1.Use drop cloth or newspapers to protect surrounding areas from spray
2.For best results, use when can is between 70°F and 90°F (21°C and 32°C).
3.SHAKE CAN vigorously for at least one minute after rattle is heard and occasionally during use to insure uniformity and to prevent
4.Point opening of spray button toward object, holding can 12 to 18 inches (30 to 45 cm) from surface to be
5.Press spray button Use short, steady, even stroke while spraying.
6. Remove overspray on trim and exterior finish immediately with mineral spirits or kerosene.
Clean &Storage
If clogging develops, turn spray button 1/4 turn. If clogging persists, remove and clean spray. DO NOT stick pin or other object into can.
To clean spray button for future use, turn can upside down and press spray button for 2 second
Discard empty can in trash pick-up. DO NOT place in home garbage
For more information is see data and technical documents
DIRECTIONS
Clean and dry surface thoroughly before Remove wax, grease, dirt, etc.
BEFORE APPLYING
1.Use drop cloth or newspapers to protect surrounding areas from spray
2.For best results, use when can is between 70°F and 90°F (21°C and 32°C).
3.SHAKE CAN vigorously for at least one minute after rattle is heard and occasionally during use to insure uniformity and to prevent
4.Point opening of spray button toward object, holding can 12 to 18 inches (30 to 45 cm) from surface to be
5.Press spray button Use short, steady, even stroke while spraying.
6. Remove overspray on trim and exterior finish immediately with mineral spirits or kerosene.
Clean &Storage
If clogging develops, turn spray button 1/4 turn. If clogging persists, remove and clean spray. DO NOT stick pin or other object into can.
To clean spray button for future use, turn can upside down and press spray button for 2 second
Discard empty can in trash pick-up. DO NOT place in home garbage
For more information is see data and technical documents
