About this Product
Lag-Kote II Interior Lagging Encapsulant creates a long-lasting, flexible barrier over friable asbestos containing materials, protecting you and your family against airborne asbestos fibers. Using a thick-bodied formula, this asbestos encapsulation sealant minimizes dripping, cleanup and product waste during application. It offers excellent adhesion over galvanized metal, wood, and masonry. Lag-Kote is an ideal option for HVAC systems – sealing interior pipe lagging, boiler jackets, breeching and other components. Repair any damage to your surface and ensure it is clean before applying Lag-Kote with a brush, roller, or painter's mitt. Follow all directions on label for application.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- ASBESTOS LAGGING ENCAPSULANT: Create a long-lasting, flexible barrier over interior friable asbestos containing material with Fiberock Lag-Kote II Interior Lagging Encapsulant.
- THICK-BODIED FORMULA minimizes dripping, cleanup and product waste during application with an aesthetically pleasing, washable finish that provides years of protection.
- IDEAL FOR HVAC SYSTEMS: Lag-Kote II is perfectly suited for sealing interior pipe lagging, boiler jackets, breeching and other components of heating and ventilation systems. It can also be applied over galvanized metal, wood, masonry and more.
- EASY TO APPLY: Patch any torn or ruptured lagging before application. Apply 1-2 coats of Lag-Kote with a brush, roller or painter's mitt. Follow all directions on label.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
Lag-Kote II is a thick bridging encapsulant/sealant specifically formulated for application over interior friable Asbestos Containing Material (ACM). It is ideally suited to encapsulate interior pipe lagging, boiler jackets, breeching and other components of heating and ventilation systems. Its thick body minimizes dripping, cleanup and product waste while providing a smooth, washable, aesthetically superior finish that will provide years of protection. Lag-Kote II is a flexible coating that can be applied over galvanized metal, wood, masonry or other sound surfaces to prevent the release of harmful asbestos fibers.
-
SURFACE PREPARATION
Carefully clean up with a wet mop or HEPA vacuum.
SURFACE REPAIRS & CLEANING
Lagging that is torn, ruptured or delaminated should be repaired with:
- Patching Cement: Mix cement with water and cap all exposed ends and voids.
- Lag Kloth Water-Activated Repair Cloth: Lag Kloth should be dipped in water and applied to the asbestos containing material. Upon completion of repairs, prepare the surface for the application of Lag Kote II. Thoroughly remove all dust and dirt that has accumulated on lagging or covering, use a vacuum with a HEPA filter specifically designed to capture hazardous dust and waste or wipe surfaces with a damp cloth. Do not air clean surfaces; this could increase asbestos exposure.
-
APPLICATION TOOLS
Apply Lag Kote II with brush, roller or airless spray equipment.
- Brush: Synthetic, nylon or polyester bristle
- Roller: Synthetic Fiber 3/8” nap or longer
- Spray Settings: Pressure: 2200-2700 P.S.I. Tips: .017 to .021 tips
-
MIXING
Lag Kote II may be diluted by adding up to 10% water. Prior to application, stir Lag Kote II thoroughly to achieve a uniform consistency. Lag Kote II can be tinted to pastel colors.
PRODUCT APPLICATION
Select a brush, roller or painter’s mitt for convenient application to the ACM. Apply 1-2 coats of Lag Kote II to the desired film thickness. Minimum film thickness may vary with desired results and type of application.
COVERAGE
- Smooth Surfaces: 125-175 sq. ft. per gallon
- Porous Surfaces: 75-100 sq. ft. per gallon
-
DRYING TIME
- @ 70°F 50% R.H
- To Touch – 1-2 hours
- Recoat – 8-16 hours
-
CLEANUP
Tools and drippings should be cleaned with warm soapy water before coating dries. Follow equipment manufacturer’s directions to clean spray equipment. Dispose of all waste according to current local, state and federal regulations.
PRECAUTIONS
Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter. Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air. Protective clothing should be worn. Careful consideration must be given to all EPA, OSHA, federal, state and local regulations in effect prior to the application of this product.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.