Typical Applications

Usage Instructions

Applications: Used to fill and seal around gaps and penetrations in the building envelope to stop air infiltration. Application areas: cracks, crevices, beneath base plates, mud sills, corner joints, exterior cracks, around utility panels, pipes and duct penetrations, etc. Designed for the contractors using large amounts of foam to insulate and air seal.

Preparation for use: Substrate must be clean, dry, free of loose particles, and free of dust, grease and mold release agents.

Use: Optimal product temperature is 65-80°F (18-27°C). Open top flap of box and remove accessories and cylinder. Attach ball valve (on/off valve) in closed position onto end of hose and tighten with a wrench. USE THREAD SEALING TAPE OR LIQUID TO PREVENT LEAKAGE ON EVERY CONNECTION. Kits include two wands of different lengths. A six inch wand and a ten inch wand. Choose the size brass nozzle wand that fits your needs. If using kit with metal nozzle, install on the end of ball valve with a wrench. If using kit with optional reusable one component dispensing unit, refer to instructions included with dispensing unit for detailed information on its use. SHAKE KIT WELL. Remove plastic valve protector from cylinder outlet, hand tighten hose fitting to cylinder. Then use a wrench to thoroughly tighten. Open cylinder valve completely (making sure ball valve is in closed position). An adapter for gun use (F61125) is available to switch from the wand dispensing tool to a Handi-Tool®; HT300, HT500, and HT700.

Resources

• Safety Data Sheet
• Technical Data Sheet
• Operating Instructions