GARDNER Flat Roof Coat-N-Seal Liquid Rubber Coating – Pro Solutions Direct

Free shipping on orders over $25.00! *Free Shipping does not include Alaska and Hawaii

GARDNER Flat Roof Coat-N-Seal Liquid Rubber Coating

GARDNER Flat Roof Coat-N-Seal Liquid Rubber Coating

Regular price
$224.99
Sale price
$224.99
Regular price
$279.99
Unit price
per 
MFG SKU: SK-8245
Stock: Out of Stock In Stock
Regular price
$224.99
Sale price
$224.99
Regular price
$279.99
Unit price
per 

About this Product

Gardner® Flat Roof Coat-N-Seal Liquid Rubber Coating is formulated specifically to restore and waterproof worn roof surfaces. Ideal for commercial or residential flat or low slope roof surfaces. Great choice for built up roofs, concrete roofs, parapet walls, foam, RV's, rubber, mobile homes, EPDM and TPO roofs. Easy and fast to apply, plus delivers superior waterproofing protection that will provide a permanent seal for the life of the roof. The rubberized finish expands and contracts to resist cracking, and reduces thermal shock. UV inhibitors reflect and keep surfaces cooler which allow the roof to ultimately last longer. This fast set moisture-cure product, delivers superior waterproofing and sealing, and is well suited to be used in hot or cold climates. 

Gardner® Flat Roof Coat-N-Seal FRS-1® is formulated specifically to restore and waterproof worn roof surfaces. Ideal for commercial or residential flat or low slope roof surfaces. Great choice for built up roofs, concrete roofs, parapet walls, foam, RV’s, rubber, mobile homes, EPDM and TPO roofs. Easy and fast to apply, plus delivers superior waterproofing protection that will provide a permanent seal for the life of the roof. The rubberized finish expands and contracts to resist cracking, and reduces thermal shock. UV inhibitors reflect and keep surfaces cooler which allow the roof to ultimately last longer. This fast set moisture-cure product, delivers superior waterproofing and sealing, and is well suited to be used in hot or cold climates. 

  • Stop and Seals Leaks on Worn Roofs
  • Permanent 100% Waterproof Finish
  • Commercial-Grade Durability
  • One Coat Application

PRECAUTIONS

  • For exterior use only. 
  • Protect building inlets from product vapors or fumes. 
  • DO NOT allow product to freeze. 
  • Protective clothing, gloves and eyewear should be used during application of these products. 
  • When transporting this product, ensure that lid is tight and pail secure and upright. 
  • DO NOT allow pail to tumble as this may cause lid to loosen and leakage to occur. 
  • Do not transport on passenger seats or inside the passenger compartment of any vehicle. 
  • Store product in the cargo area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. 
  • For longest life, store in controlled environment, 45 °F - 80 °F. DO NOT store in direct sunlight. 
  • DO NOT store at temperatures above 99 °F. Close container after use. 
  • DO NOT reuse empty containers. 
  • Ponding water creates excessive weight on roofs and may compromise structural integrity leading to a potential collapse hazard. 
  • Always follow the National Roofing Contractors Association guidelines to remove ponding water from roof surfaces. 
  • Slip Warning: Use extreme caution when walking or working on silicone coated surfaces. Surface is extremely slippery and can create a fall hazard resulting in injury or death. 
  • Use OSHA approved fall protection when on roof surfaces. 

PREPARATION

  • Repair leaks and damaged areas with Black Jack® Silicone Roof Patch. 
  • Power wash clean all surfaces, and remove dirt and grime with a degreaser/cleaner. 
  • If mold is present, clean with a proper bleach solution (1 part bleach to 2 parts water). 
  • Allow roof to dry 24 hours before coating. 
  • For applications over asphalt roof surfaces, apply Black Jack® Stain-Stop Primer as a base coat for proper stain blocking protection. 


APPLICATION

  • Mix well before applying. 
  • A power drill mixing tool is ideal. 
  • Confirm all dew or moisture has completely dried from the roof before applying. 
  • Best applied on a clear, dry day with warming temps between 35 °F and 120 °F. 
  • Use a quality, heavy duty 3/4” nap paint roller
  • This coating can be applied in 1 coat to surfaces in good condition. 
  • Spread at 71 sq/ft per gallon which will yield a dry film of 22 mils. 
  • Recoat rough or damaged areas as needed.

SPRAY INFO

Professional Airless Sprayer, 2000-3000 PSI, .030 - .041 Tip Size, 1-3 GPM.


COVERAGE RATE

Container covers approximately 335 sq/ft at a 22 mil dry film thickness on smooth surfaces, apply heavier coat on rough surfaces


CLEAN-UP

Clean tools immediately with mineral spirits


PRECAUTIONS

For exterior use only. Protect building inlets from product vapors or fumes. DO NOT allow product to freeze. Protective clothing, gloves and eyewear should be used during application of these products. When transporting this product, ensure that lid is tight and pail secure and upright. DO NOT allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle. Store product in the cargo area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. For longest life, store in controlled environment, 45 °F - 80 °F. DO NOT store in direct sunlight. DO NOT store at temperatures above 99 °F. Close container after use. DO NOT reuse empty containers. Ponding water creates excessive weight on roofs and may compromise structural integrity leading to a potential collapse hazard. Always follow the National Roofing Contractors Association guidelines to remove ponding water from roof surfaces. Slip Warning: Use extreme caution when walking or working on silicone coated surfaces. Surface is extremely slippery and can create a fall hazard resulting in injury or death. Use OSHA approved fall protection when on roof surfaces. 

 

COMPLIANCE

CRRC rated, FL Building Code and Miami-Dade County approved, ASTM D6694, ASTM D7281. NSF Certified and meets the requirements of CEC Title 24.

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)