Product Insights

ABC Fiberspray uses the same effective formula as ABC Asbestos Binding Compound, offered in a convenient, airless spray can. ABC Fiberspray minimizes asbestos fiber release and conveniently permits application of the encapsulant from any position, even upside down.

Features:

• Ideal for use inside glove bags
• Unique spraying technology enables application at any angle

Usage Instructions

How to Use

APPLICATION INFORMATION

ENCAPSULATION

Use ABC FiberSpray to effectively encapsulate small areas of asbestos containing material (ACM).

GLOVEBAG USE

Place ABC FiberSpray in the pouch within the glovebag. Apply ABC FiberSpray to seal the friable pipe insulation ends after the insulation has been removed. Use ABC FiberSpray to “lockdown” residual microscopic fibers to the substrate.

BULK SAMPLE REPAIR

Apply ABC FiberSpray to friable areas after bulk samples have been removed from the ACM or suspected ACM.

PREPARATION

Shake well before spaying.  If nozzle orifice is clogged, remove the dried film from the cap or replace with an extra nozzle (provided upon request).

APPLICATION

Apply ABC FiberSpray by spraying the surface from a distance of 8 to 12 inches.

CLEANUP

Clean the nozzle with warm soapy water before the coating dries.

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air. Protective clothing should be worn. Tools and drippings should be cleaned immediately with clean, soapy water before the coating dries.  Careful consideration should be given to all Environmental Protection Agency (EPA), OSHA and state regulations in effect at the time of application of ABC FiberSpray.

Resources

Product Data Sheet (PDS)

Safety Data Sheet (SDS)