About this Product
ULTRA RECON Smoke Odor Sealer by Fiberlock Technologies encapsulates malodors on structural surfaces and blocks the toughest stains, typically those found on fire damage restoration projects. Designed with OdorLock Plus technology, ULTRA RECON prevents smoke odors and stains from migrating through the coating while maintaining its breathability. With just one coat, control and block odors even through seasonal changes in temperature and humidity with ULTRA RECON Smoke Odor Sealer. Permanently encapsulate smoke odors without trapping moisture. Apply with a brush or airless spray equipment and follow all application instructions on label.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- SMOKE ODOR SEALER: Encapsulate malodors on structural surfaces and block the toughest stains found on fire damage restoration projects with ULTRA RECON Smoke Odor Sealer – bonds to nearly any substrate.
- ODORLOCK PLUS TECHNOLOGY: Unlike typical water based coatings that "wick" smoke odors and stains as they dry, ULTRA RECON Smoke Odor Sealer prevents smoke odors and stains from migrating through the coating while maintaining breathability.
- LONG-LASTING DURABILITY: ULTRA RECON Smoke Odor Sealer provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity.
- EXCELLENT STAIN BLOCKER: Apply ULTRA RECON Smoke Odor Sealer on ductwork, wall cavities and other affected substrates. Highly permeable, water based and non-flammable, ULTRA RECON blocks stains without trapping moisture.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
ULTRA RECON Smoke Odor Sealer is a premium finish grade, solvent free smoke odor sealant and stain blocker designed to eliminate malodors on multiple surfaces and block tough staining. ULTRA RECON Smoke Odor Sealer with OdorLock Plus technology is water based and does not contain flammable solvents. Unlike typical water based coatings that “wick” smoke odors and stains out of the substrate as they dry, ULTRA RECON Smoke Odor Sealer with OdorLock Plus technology prevents smoke odors and stains from migrating through the coating, it also contains specialized malodor neutralization technology. This multiphase technology provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity. ULTRA RECON Smoke Odor Sealer (Ultra SOSTM) is your final step to encapsulate residual odors typically found on fire damage restoration projects.
- Finish grade, solvent free
- Blocks tough stains
- Moisture permeable
- Tintable
- Eliminates malodors on multiple surfaces
- Blocks pet and trauma scene odors
- Easily accepts topcoat
- MFG SKU: 3092-1, 3092-5, 3093-1, 3093-5
SURFACE PREPARATION
Prior to applying Fiberlock’s ULTRA RECON Smoke and Odor Sealer it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol. This protocol should include the following steps: odor cleaning, odor neutralization and odor encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by the application of RECON Extreme Duty Odor Counteractant. After the substrate is clean, dry and sound, apply ULTRA RECON Smoke Odor Sealer to encapsulate any residual odors that remain.
PRODUCT APPLICATION
Apply ULTRA RECON Smoke Odor Sealer generously and uniformly by brush, airless spray or roller. Apply one coat of ULTRA RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. Two-coats may be required on some porous or heavily stained surfaces. Topcoat floor applications when foot traffic or heavy storage is expected. ULTRA RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon. Can be directly applied to wallboard, sheetrock, wood, masonry and concrete. Ferrous metals may require a DTM primer to prevent flash rusting.
APPLICATION TOOLS
Apply ULTRA RECON Smoke Odor Sealer with a brush, roller or airless spray equipment.
- Brush: Synthetic, nylon or polyester bristle
- Roller: 3/8” nap synthetic fiber
- Spray Settings: Pressure: 2000-3000 P.S.I. Tips: .015 to .021 tips
COVERAGE
- Smooth Surfaces: 200-400 ft2/gal.
- Porous Surfaces: 100-200 ft2/gal.
DRYING TIME
- @ 70°F 50% R.H.
- To Touch: 30 Min.
- Recoat: 2 Hours
- Topcoat: 2 Hours
CLEANUP
Clean tools and drippings with warm soapy water before ULTRA RECON Smoke Odor Sealer dries. Dispose of waste according to all existing local, state and federal regulations. PRECAUTIONS Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, additives, solvents or colors in oil. Do not apply when air or surface temperature is below 45°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. In areas with high humidity, apply when surface temperature is 45°F or higher. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.