About this Product
DYCO TUFF GLAZE is a high gloss waterborne acrylic sealer designed to overcoat DYCO's waterborne floor coatings and adds a clear high gloss protective finish. TUFF GLAZE resists hot tire pickup, fading, cracking and peeling while also giving a mildew resistant barrier. TUFF GLAZE is easy to apply, protects newly painted surfaces and gives a long lasting showroom finish.
RECOMMENDED USES:
Driveways
Garages
Walkways
Patios
Pool Decks
Docks
Other Concrete, Wood, Brick, Metal, and Vinyl Surfaces
Product Specifications:
- Detailed Specifications
- Product Insights
- Product Features
- Usage Instructions
- Resources
- Product Reviews
Dyco® TUFF GLAZE™ is a high gloss waterborne acrylic sealer designed to overcoat DYCO’s waterborne floor coatings and adds a clear high gloss protective finish. TUFF GLAZE resists hot tire pickup, fading, cracking and peeling while also giving a mildew resistant barrier. TUFF GLAZE is easy to apply, protects newly painted surfaces and gives a long lasting showroom finish.
RECOMMENDED USES:
• Driveways
• Garages
• Walkways
• Patios
• Pool Decks
• Docks
• Other Concrete, Wood, Brick, Metal, and Vinyl Surfaces
DYCO TUFF GLAZE is a high gloss waterborne acrylic sealer designed to overcoat DYCO's waterborne floor coatings and adds a clear high gloss protective finish. TUFF GLAZE resists hot tire pickup, fading, cracking and peeling while also giving a mildew resistant barrier. TUFF GLAZE is easy to apply, protects newly painted surfaces and gives a long lasting showroom finish.
RECOMMENDED USES:
Driveways
Garages
Walkways
Patios
Pool Decks
Docks
Other Concrete, Wood, Brick, Metal, and Vinyl Surfaces
Product Specifications:
PRECAUTION: Do not freeze. Wear protective clothing and eyewear during application of this product. Do not transport on passenger seats or inside passenger compartment of any vehicle. Store product in cargo area of vehicle, and secure with protective cloths to prevent accidental spill damage. Do not store at temperature above 100°F (37°C). Do not use in drinking water or food systems.
READ AND FOLLOW ALL DIRECTIONS: Surfaces must be clean, dry and sound. Contaminants such as dirt, dust, grease, wax, oil, soap film, rust, mold, mildew, bond breakers and curing compounds must be removed before application. Loose, chipping and peeling of previous coating must be removed before application. Do not apply to damp surfaces or when surface temperature is below 50°F (10°C) or above 100°F (37°C). Do not apply if rain is prevalent. Do not thin.
APPLICATION: Mix thoroughly before use. TUFF GLAZE is a one (1) coat process. Apply one (1) coat evenly with a medium nap roller, brush or airless sprayer. Do not leave puddles or roller marks. Coverage is 200-300 sq. ft./ gal. depending on surface porosity and application method. When applying with a medium nap roller (3/8” nap) DO NOT APPLY excessive pressure on the roller. Roll with light to medium pressure. Do not apply to areas where standing water is evident. Do not apply where there is a possibility of slipperiness. Dries to touch in two (2) hours @ 77°F (25°C) and 50% R.H. Ready for foot traffic in two (2) hours and vehicle traffic in 72 hours. Low temperature, high humidity, thick films or poor ventilation will increase these dry times.
Refer to Safety Data Sheet for additional health and safety information.
Refer to Product Spec Sheet for additional application details and further information.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.