About this Product
Provide your surfaces with a layer of protection against the growth of mold with Fiberlock IAQ 6500 Mold Resistant Coating. This semi-gloss acrylic water based coating is formulated with a fungistatic agent that's been independently proven to inhibit the growth of mold. It successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. Use it on wood, plaster, wallboard, sheetrock, concrete, masonry block and more. IAQ 6500 is easy to apply with a brush, roller or airless sprayer. Follow all directions on label for application. Packaged in a 5-gallon container.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- MOLD RESISTANT COATING: Containing an effective fungistatic agent, Fiberlock IAQ 6500 helps you provide your surfaces with a layer of protection against mold growth. It's durable and flexible for a long-lasting finish.
- INDEPENDENTLY TESTED: IAQ 6500 has been tested by independent, certified laboratories – passing both ASTM G-21 and ASTM D-3237 mold resistance testing with the highest scores possible.
- VERSATILE APPLICATIONS: This mold resistant paint is perfect for wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. It can also be used on new structural materials during construction.
- EASY TO APPLY: Ensure that your surface is clean and apply IAQ 6500 with a brush, roller or airless sprayer. Follow all directions on label. Packaged in a 5-gallon container.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
IAQ 6500 is a black, mold resistant coating for professional use that contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6500 is a durable, flexible, and permeable 100% acrylic water-based semi-gloss coating that can withstand the moist, humid conditions present in environments conducive to mold growth. IAQ 6500 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed both ASTM G-21 and ASTM D-3273 mold resistance testing with the highest scores possible. IAQ 6500 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6500 can also be used on new structural materials to help prevent mold growth during building construction.
- Tested by independent laboratories for mold resistance: ASTMG-21 and ASTM D-3273
- Mold resistant*
- Tintable formula
- 100% acrylic
- MFG SKU: 8365-5
PRECAUTIONS
- Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C).
- Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil.
- The IAQ 6500 coating is resistant to mold only on the surface of the coating.
- No mold resistance claim is made other than to the coating itself.
- The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs or other disease-causing organisms.
- Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content.
- Use adequate ventilation during application.
- When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.
- For interior use only.
SURFACE PREPARATION
Surfaces to be coated must be free of dust, mildew, mold, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap and other surface contamination. Clean mold stained surfaces with Advanced Peroxide Cleaner, or use an EPA registered antimicrobial disinfectant cleaner such as IAQ 2000, IAQ 2500, ShockWave or ShockWave RTU. Patch irregularities with vinyl patching paste or an appropriate patching compound. IAQ 6500 is self-priming over bare sheetrock, composition board, ceiling tile and concrete.
WALLBOARD, SHEETROCK, GYPSUM BOARD
Joint cement should be sanded smooth, but avoid abrading the paper.
FERROUS METAL
Clean, then prime with IAQ 4000 rust inhibiting direct-to-metal primer.
WOOD
Seal knots and stains with IAQ 5000 stain-blocking primer.
MASONRY BLOCK
Apply one coat of IAQ 3000 block filler if a denser surface is desired.
APPLICATION TOOLS
Apply IAQ 6500 with brush, roller or airless spray equipment.
- Brush: Synthetic, nylon or polyester bristle
- Roller: Synthetic fiber 3/8” nap or longer
- Spray Settings Pressure: 1500-3000 P.S.I. Tips: .015 to .023 tips
PRODUCT APPLICATION
IAQ 6500 is supplied ready to use, but can be thinned sparingly with water (up to 1⁄2 pint water per gallon) for proper application consistency if necessary. Apply IAQ 6500 generously and uniformly by brush, roller, or airless spray. Apply one coat of IAQ 6500, and ensure that the nished surface is properly sealed. To ensure that the nished surface is properly sealed, two-coats may be required on some porous surfaces.
COVERAGE
- Smooth Surfaces- 400-450 sq. ft. per gallon
- Porous Surfaces- 200-300 sq. ft. per gallon
DRYING TIME
- @ 70°F 50% R.H
- To Touch – 1 Hour
- Recoat – 4 Hours
CLEANUP
Clean tools and drippings with warm soapy water before Fiberlock IAQ 6500 dries. Dispose of all waste according to all existing local, state and federal regulations.
PRECAUTIONS
Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. The IAQ 6500 coating is resistant to mold only on the surface of the coating. No mold resistance claim is made other than to the coating itself. The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs or other disease-causing organisms. Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter. For interior use only.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.