About this Product
RECON Smoke Odor Sealer by Fiberlock Technologies encapsulates malodors on structural surfaces and blocks the toughest stains, typically those found on fire damage restoration projects. Designed with OdorLock technology, RECON prevents smoke odors and stains from migrating through the coating while maintaining its breathability. With just one coat, control and block odors even through seasonal changes in temperature and humidity with RECON Smoke Odor Sealer. Permanently encapsulate smoke odors without trapping moisture. Apply with a brush or airless spray equipment and follow all application instructions on label.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- SMOKE ODOR SEALER: Encapsulate malodors on structural surfaces and block the toughest stains found on fire damage restoration projects with RECON Smoke Odor Sealer – bonds to nearly any substrate.
- ODORLOCK TECHNOLOGY: Unlike typical water based coatings that "wick" smoke odors and stains as they dry, RECON Smoke Odor Sealer prevents smoke odors and stains from migrating through the coating while maintaining breathability.
- LONG-LASTING DURABILITY: RECON Smoke Odor Sealer provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity.
- EXCELLENT STAIN BLOCKER: Apply RECON Smoke Odor Sealer on ductwork, wall cavities and other affected substrates. Highly permeable, water based and non-flammable, RECON blocks stains without trapping moisture.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
RECON Smoke Odor Sealer is a revolutionary solvent free smoke odor sealant and stain blocker designed to encapsulate malodors on multiple surfaces and block the toughest stains. RECON Smoke Odor Sealer with OdorLock technology is water based, permeable and is not flammable. Unlike typical water based coatings that “wick” smoke odors and stains out of the substrate as they dry, RECON Smoke Odor Sealer with OdorLock technology prevents smoke odors and stains from migrating through the coating while maintaining its breathability. This technology provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity. RECON Smoke Odor Sealer (SOSTM) is your final step to encapsulate residual odors typically found on fire damage restoration projects.
- Permanently encapsulates smoke odors
- Highly permeable; doesn’t trap moisture
- Can be applied in ductwork
- Available in a tintable white or clear
- Excellent stain blocker
- Water based and non-flammable
- Bonds to nearly any substrate
- Ideal for use in wall cavities
- MFG SKU: 3090-1, 3090-5, 3091-1, 3091-5
PRECAUTIONS
- Store in a dry place at temperatures between 50°F (10°C) and 90°F. (32°C).
- Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil.
- Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content.
- Use adequate ventilation during application.
- When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.
- For interior use only.
PRODUCT APPLICATION
- Apply RECON Smoke Odor Sealer generously and uniformly by brush or airless spray.
- Roller application is not recommended.
- Apply one coat of RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two-coats may be required on some porous or heavily stained surfaces.
- Topcoat floor applications when foot traffic or heavy storage is expected.
- RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon.
- HVAC Application: RECON Smoke Odor Sealer can be used to encapsulate malodors within HVAC systems as part of fire damage restoration. This product can be used in both fiberglass lined and unlined ductwork. Surfaces should be clean, dry and sound prior to application.
- RECON Smoke and Odor Sealer meets requirements of NFPA 90A/90B standard.
SURFACE PREPARATION
Prior to applying Fiberlock’s RECON Smoke Odor Sealer it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol. This protocol should include the following steps: odor cleaning, odor neutralization and odor encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by the application of RECON Extreme Duty Odor Counteractant. After the substrate is clean, dry and sound apply RECON Smoke Odor Sealer to encapsulate any residual odors that remain.
APPLICATION TOOLS
Apply RECON Smoke Odor Sealer with a brush or airless spray equipment.
- Brush: Synthetic, nylon or polyester bristle
- Roller: Not recommended
- Spray Settings: Pressure: 2200-3000 P.S.I. Tips: .017 to .023 tips
TOPCOATING
Wait at least 24 hours prior to topcoating @ 70 – 77°F, 50% R.H. Lightly sand and clean surface of Recon Smoke Odor Sealer prior to topcoating. Do not topcoat Recon Smoke Odor Sealer with anything less than a quality 100% acrylic latex coating with an eggshell sheen or higher. Avoid enamel, alkyd and oil based paint topcoats. Test patch prior to application is recommended. Failure to follow these guidelines could result in cracking or “alligatoring” on certain substrates.
COVERAGE
- Smooth Surfaces: 200-400 ft2/gal.
- Porous Surfaces: 100-200 ft2/gal.
DRYING TIME
- @ 70°F 50% R.H
- To Touch: 30 Min.
- Recoat: 4 Hours
CLEANUP
Clean tools and drippings with warm soapy water before RECON Smoke Odor Sealer dries. Dispose of waste according to all existing local, state and federal regulations.
PRECAUTIONS
Store in a dry place at temperatures between 50°F (10°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. Do not apply when air or surface temperature is below 50°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter. For interior use only.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.