About this Product
Product Specifications:
Product Specifications:
|
ITEM NUMBER |
DESCRIPTION |
SIZE |
DISPENSING TYPE |
YIELD |
|
P12042 |
2-12 SLOW RISE |
II-12 |
Disposable |
12.7 FT3 (.36 m3) |
|
P12043 |
2-41 SLOW RISE |
II-41 |
Disposable |
41.7 FT3 (1.18 m3) |
Applications: Designed to fill cavities, molds, fixtures, holes, or voids. The foam can be dispensed into clean and dry voids of various size to fill, seal, insulate, provide buoyancy, strengthen, reduce vibration or deaden sound. Residential wall assemblies that use drywall or gypsum board may be prone to cracking or buckling due to either overfilling the cavity or plugging the pressure relief holes. HandiFoam Slow Rise can also be used as an SPF and sprayed onto vertical or horizontal surfaces.
Preparation for use: Area to be filled must have minimal obstructions and if used in a residential wall cavity have no existing insulation. Before using, determine the structural stability of the area to be filled, certain applications may require clamping or bracing to provide uniform support against foaming pressure. Read SDS, Operating Instructions, and Product Stewardship Guidelines. For additional information go to www.handifoam.com.
Use: Warm/Cool chemical to 75-85◦F (24-29◦C). Follow instructions for set-up found in the operating instructions.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.