Dyco® POOL PAINT™ | Waterborne Acrylic – Pro Solutions Direct

Dyco® POOL PAINT™ | Waterborne Acrylic

  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
  • Load image into Gallery viewer, Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic
Dyco® POOL PAINT™ | Waterborne Acrylic

Dyco® POOL PAINT™ | Waterborne Acrylic

Regular price
$58.05
Sale price
$58.05
Regular price
$68.29
Unit price
per 
White
Ocean Blue
MFG SKU: DYC3151/1
Stock: Out of Stock In Stock

Many of our products have bulk discounts for customers in our Pro Program. Sign up for our Pro Program here.

Purchase Options
Delivery Frequency
Regular price
$58.05
Sale price
$58.05
Regular price
$68.29
Unit price
per 

About this Product

DYCO POOL PAINT can be used on concrete and plaster usually found in pools, decks and all masonry surfaces where resistance to water, salt and chemicals are required. DYCO Pool Paint is a waterbased pool paint with superior film properties designed to provide a highly resistant finish on concrete, plaster and masonry surfaces with the ability to seal hairline cracks. Formulated with Ultraviolet, Infrared, and harsh pool chemical inhibitors

Durable in Fresh or Salt Water
Excellent Color Retention and Fade Resistance
Superior film properties that seals hairline cracks
Resistant to Peeling, Cracking, and Blistering
Chemical and Stain Resistant
Self-Priming on Bare Concrete, Plaster, or Marcite
Excellent Waterproof Characteristics
Water-Based for Easy Cleanup


Product Specifications:

Detailed Specifications

DYCO® WB POOL PAINT™ can be used on concrete and plaster usually found in pools, decks and all masonry surfaces where resistance to water, salt and chemicals are required.

DYCO Pool Paint WB is a waterbased pool paint with superior film properties designed to provide a highly resistant finish on concrete, plaster and masonry surfaces with the ability to seal hairline cracks. Formulated with Ultraviolet, Infrared, and harsh pool chemical inhibitors.

  • Durable in Fresh or Salt Water
  • Excellent Color Retention and Fade Resistance
  • Superior film properties that seals hairline cracks
  • Resistant to Peeling, Cracking, and Blistering
  • Chemical and Stain Resistant
  • Self-Priming on Bare Concrete, Plaster, or Marcite
  • Excellent Waterproof Characteristics
  • Water-Based for Easy Cleanup

Product Insights

DYCO® POOL PAINT™ Waterborne (WB) Acrylic Coating is formulated for use on concrete and plaster usually found in pools, decks, and masonry surfaces where resistance to water, salt, and chemicals is required. Manufactured with Ultraviolet (UV), Infrared (IR), and harsh pool chemical inhibitors, DYCO POOL PAINT WB fills hairline cracks and provides an attractive, tile-like semi-gloss finish. DYCO POOL PAINT WB also delivers superior stain resistance, offers excellent color retention and comes in White and Ocean Blue.

Product Features

DYCO POOL PAINT can be used on concrete and plaster usually found in pools, decks and all masonry surfaces where resistance to water, salt and chemicals are required. DYCO Pool Paint is a waterbased pool paint with superior film properties designed to provide a highly resistant finish on concrete, plaster and masonry surfaces with the ability to seal hairline cracks. Formulated with Ultraviolet, Infrared, and harsh pool chemical inhibitors

Durable in Fresh or Salt Water
Excellent Color Retention and Fade Resistance
Superior film properties that seals hairline cracks
Resistant to Peeling, Cracking, and Blistering
Chemical and Stain Resistant
Self-Priming on Bare Concrete, Plaster, or Marcite
Excellent Waterproof Characteristics
Water-Based for Easy Cleanup


Product Specifications:

Usage Instructions

Recommended Surfaces

  • Concrete
  • Marcite
  • Plaster

Application, Dry Times and Clean Up

  • Application Temperatures: 50 - 110 °F (10 - 43.33 °C)
  • Application Tools: Brush, Roller or Airless
  • Dry Times: Touch - 1 Hour; Recoat – 8 Hour (Dry Time Based on 77 °F (25 °C), 50% Relative Humidity)
  • DYCO Pool Paint requires a two coat application.
  • Do not apply if heavy dew or rain is expected within 12 hours.
  • Follow all label instructions for preparation and application of Dyco Pool Paint.
  • Surface must be 100% dry before application.
  • For a non-skid surface, add DYCO Skid Gard #45 skid resistant texture additive.
  • Do not fill pool before paint is cured.
  • Allow a minimum of five (5) days after the final coat before filling pool.
  • Thinner: Do Not Thin
  • Clean Up: Soap and Water

Previously Painted Surfaces

  • Should be pressure cleaned with a TSP (tri-sodium phosphate) or Soilax solution to remove all dirt, oils, loose or peeling paint and excessive chalk and mineral deposits from previous use of the pool.
  • Cracks, voids or failing joints must be repaired.
  • Previous coatings must be checked for adhesion. All loose or peeling existing paint must be removed. Sandblasting may be necessary to prepare the surface properly.
  • Do not apply Dyco Pool Paint if rain is expected within 12 hours.

New Concrete

  • Must be at least 30 to 45 days old, clean, dry, and free of all grease, oil, and any other contaminants.
  • Bare concrete should be etched with a 15-20% solution of muriatic acid to achieve a medium grade sand paper finish.
  • Neutralize the acid with a TSP (tri-sodium phosphate) solution and pressure clean.
  • Allow surface to dry completely before attempting to apply Dyco Pool Paint.
  • Test for moisture by taping all four sides of an 18”x18” piece of polyethylene to the deepest area of the pool surface for 24 hours.
  • If moisture vapor is evident, the surface is NOT dry enough to accept Dyco Pool Paint.
  • Wait several days and conduct the test again.

Slippery When Wet

  • Surfaces around the pool that will receive Dyco Pool Paint should receive an additive of DYCO SKID GARD #45 to impart a non-skid surface.

Mixing

  • Read and follow label instructions before use

Tools

  • Apply with a roller or airless sprayer.
  • Roller: Use a 1/4”- 3/8” nap covers for smooth surfaces, or a 1/2” nap cover for semi-rough surfaces.
  • Apply as two thin coats and let dry for 8 hours between coats.
  • Airless sprayer may be used with .015 -.019 tips, @ 2500 psi; and a 1/4” spray hose.
  • Adjust pressure as needed for desired results, and back roll material to ensure a consistent coating.

DYCO® WB POOL PAINT™ can be used on concrete and plaster usually found in pools, decks and all masonry surfaces where resistance to water, salt and chemicals are required.

DYCO Pool Paint WB is a waterbased pool paint with superior film properties designed to provide a highly resistant finish on concrete, plaster and masonry surfaces with the ability to seal hairline cracks. Formulated with Ultraviolet, Infrared, and harsh pool chemical inhibitors.

  • Durable in Fresh or Salt Water
  • Excellent Color Retention and Fade Resistance
  • Superior film properties that seals hairline cracks
  • Resistant to Peeling, Cracking, and Blistering
  • Chemical and Stain Resistant
  • Self-Priming on Bare Concrete, Plaster, or Marcite
  • Excellent Waterproof Characteristics
  • Water-Based for Easy Cleanup

DYCO® POOL PAINT™ Waterborne (WB) Acrylic Coating is formulated for use on concrete and plaster usually found in pools, decks, and masonry surfaces where resistance to water, salt, and chemicals is required. Manufactured with Ultraviolet (UV), Infrared (IR), and harsh pool chemical inhibitors, DYCO POOL PAINT WB fills hairline cracks and provides an attractive, tile-like semi-gloss finish. DYCO POOL PAINT WB also delivers superior stain resistance, offers excellent color retention and comes in White and Ocean Blue.

DYCO POOL PAINT can be used on concrete and plaster usually found in pools, decks and all masonry surfaces where resistance to water, salt and chemicals are required. DYCO Pool Paint is a waterbased pool paint with superior film properties designed to provide a highly resistant finish on concrete, plaster and masonry surfaces with the ability to seal hairline cracks. Formulated with Ultraviolet, Infrared, and harsh pool chemical inhibitors

Durable in Fresh or Salt Water
Excellent Color Retention and Fade Resistance
Superior film properties that seals hairline cracks
Resistant to Peeling, Cracking, and Blistering
Chemical and Stain Resistant
Self-Priming on Bare Concrete, Plaster, or Marcite
Excellent Waterproof Characteristics
Water-Based for Easy Cleanup


Product Specifications:

Recommended Surfaces

  • Concrete
  • Marcite
  • Plaster

Application, Dry Times and Clean Up

  • Application Temperatures: 50 - 110 °F (10 - 43.33 °C)
  • Application Tools: Brush, Roller or Airless
  • Dry Times: Touch - 1 Hour; Recoat – 8 Hour (Dry Time Based on 77 °F (25 °C), 50% Relative Humidity)
  • DYCO Pool Paint requires a two coat application.
  • Do not apply if heavy dew or rain is expected within 12 hours.
  • Follow all label instructions for preparation and application of Dyco Pool Paint.
  • Surface must be 100% dry before application.
  • For a non-skid surface, add DYCO Skid Gard #45 skid resistant texture additive.
  • Do not fill pool before paint is cured.
  • Allow a minimum of five (5) days after the final coat before filling pool.
  • Thinner: Do Not Thin
  • Clean Up: Soap and Water

Previously Painted Surfaces

  • Should be pressure cleaned with a TSP (tri-sodium phosphate) or Soilax solution to remove all dirt, oils, loose or peeling paint and excessive chalk and mineral deposits from previous use of the pool.
  • Cracks, voids or failing joints must be repaired.
  • Previous coatings must be checked for adhesion. All loose or peeling existing paint must be removed. Sandblasting may be necessary to prepare the surface properly.
  • Do not apply Dyco Pool Paint if rain is expected within 12 hours.

New Concrete

  • Must be at least 30 to 45 days old, clean, dry, and free of all grease, oil, and any other contaminants.
  • Bare concrete should be etched with a 15-20% solution of muriatic acid to achieve a medium grade sand paper finish.
  • Neutralize the acid with a TSP (tri-sodium phosphate) solution and pressure clean.
  • Allow surface to dry completely before attempting to apply Dyco Pool Paint.
  • Test for moisture by taping all four sides of an 18”x18” piece of polyethylene to the deepest area of the pool surface for 24 hours.
  • If moisture vapor is evident, the surface is NOT dry enough to accept Dyco Pool Paint.
  • Wait several days and conduct the test again.

Slippery When Wet

  • Surfaces around the pool that will receive Dyco Pool Paint should receive an additive of DYCO SKID GARD #45 to impart a non-skid surface.

Mixing

  • Read and follow label instructions before use

Tools

  • Apply with a roller or airless sprayer.
  • Roller: Use a 1/4”- 3/8” nap covers for smooth surfaces, or a 1/2” nap cover for semi-rough surfaces.
  • Apply as two thin coats and let dry for 8 hours between coats.
  • Airless sprayer may be used with .015 -.019 tips, @ 2500 psi; and a 1/4” spray hose.
  • Adjust pressure as needed for desired results, and back roll material to ensure a consistent coating.

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

Product Reviews