About this Product
SerpiMastic Heavy Duty Asbestos Encasement Coating by Fiberlock Technologies provides an ultra-durable, weather, UV and chemical-resistant encapsulation to seal in and protect against asbestos. Designed with a high solids and high build formula, SerpiMastic is UL classified as a bridging encapsulant for use with classified sprayed fiber and cementitious technologies. Apply indoors or outdoors with a mason's trowel, soft spatula or painter's mitt and follow all application instructions on label.
Fiberlock Technologies was founded upon the simple promise of providing the highest quality product and the best possible service to its customers while conducting business with the utmost integrity. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.
Product Specifications:
- HEAVY DUTY ASBESTOS ENCAPSULANT: Gain high impact protection for asbestos, cement asbestos boards and thermal insulations on boilers and pipes with SerpiMastic Heavy Duty Asbestos Encasement Coating.
- DURABLE AND WEATHER RESISTANT COATING resists impacts up to 160 psi and provides a protective membrane indoors or outdoors. SerpiMastic abates ACM and coats friable insulating materials, protecting against physical damage.
- HIGH SOLIDS AND HIGH BUILD FORMULA exhibits excellent chemical resistance to seal in potentially hazardous particulates such as asbestos or some silica and protect against the penetration of water and other liquids.
- REPAIR DAMAGED INSULATION: SerpiMastic adheres to most insulation materials as well as other common construction surfaces, including paint, stucco, painted popcorn ceilings and on floors where tile or carpet has been removed.
- FOR OVER 35 YEARS, Fiberlock Technologies has manufactured products used to address environmental, safety and health hazards, becoming one of the most respected names in the abatement and remediation industry.
- MFG SKU: 2418-5 & 2419-5
- Extremely durable
- Resists impact up to 160 psi
- Trowelable version is ideal for painters mitt/palm application
- One coat system
- Indoor or outdoor use
- Contains no plasticizers or fiberglass
- Weather resistant
- Trowel, brush or spray application
- UL approved UL1479, ASTM E814 & E119, time temperature curve
PRECAUTIONS
- Do not ingest.
- Do not apply to energized electrical conductors.
- Always use goggles or suitable eye protection.
- If product is accidentally ingested, unless contraindicated, administer two or more glasses of water and induce vomiting. If more than trace amounts have been ingested seek medical advice.
- Wash areas of skin contact with soap & water.
- Consult Material Safety Data Sheet for additional information.
- Do not add water.
- Keep lid on until ready to use.
- Stir thoroughly.
- Do not mix with any other coatings, solvents or colors in oil.
- Apply on when air and surface temperature are below 40°F and 90°F.
- Do not apply when drying conditions are poor.
- Use adequate ventilation during application.
- Store in a dry place at temperatures between 40°F and 90°F.
- Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air.
- Protective clothing should be worn.
SURFACE PREPARATION
Surfaces to be protected should be free of excessive loose dirt or oil. SerpiMastic Coating will bond tightly to virtually any surface. For repairs of large damaged areas, weak insulation or areas requiring greater mechanical strength apply Fiberlock Lag Kloth or Serpi Wet-Wrap ‘N’ Seal prior to SerpiMastic.
APPLICATION TOOLS
Apply with trowel or brush. SerpiMastic Trowelable can be applied using any ordinary steel mason’s trowel or similar spreading tool. For smoother finish use a wet trowel.
PRODUCT APPLICATION
SerpiMastic is supplied ready to use, thinning is not required or recommended. SerpiMastic is a water-based coating material. Coating application thickness, temperature and humidity will affect drying rate. Drying time can be minimized by applying several thinner coats, with 24 hours drying time between each coat. SerpiMastic Trowelable can be applied in a single application up to 500 mils (12.7 mm) thick without cracking or shrinking.
COVERAGE
18.5 ft2/gal. @ 63 dry mils
PRECAUTIONS
Do not ingest. Do not apply to energized electrical conductors. Always use goggles or suitable eye protection. If product is accidentally ingested, unless contraindicated, administer two or more glasses of water and induce vomiting. If more than trace amounts have been ingested seek medical advice. Wash areas of skin contact with soap & water. Consult Material Safety Data Sheet for additional information. Do not add water. Keep lid on until ready to use. Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. Apply on when air and surface temperature are below 40°F and 90°F. Do not apply when drying conditions are poor. Use adequate ventilation during application. Store in a dry place at temperatures between 40°F and 90°F. Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air. Protective clothing should be worn.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.